Is e am Bòrd Cearcall Clò-bhuailte clach-oisinn thoraidhean dealanach, tha e glè chudromach gum faod na toraidhean agad ruith gu seasmhach airson ùine mhòr no nach eil.Mar neach-dèanamh proifeasanta PCB agus PCB Assembly, chuir PCBFuture luach àrd air càileachd bùird cuairteachaidh.
Tòisichidh PCBFuture bho ghnìomhachas PCB Fabrication, an uairsin leudachadh gu seirbheisean co-chruinneachadh PCB agus co-phàirtean, a-nis air fàs mar aon de na saothraichean cruinneachaidh PCB turnkey as fheàrr.Bidh sinn a’ dèanamh tòrr oidhirpean gus tasgadh a dhèanamh air uidheamachd adhartach airson teicneòlas nas fheàrr, siostam a-staigh làn-leasaichte airson èifeachdas nas fheàrr, cumhachd a thoirt do shaothair airson sgilean nas fheàrr.
| Pròiseas | Nì | Comas Pròiseas | |
| Bun-fhiosrachadh | Comas Riochdachaidh | Cunntas sreath | 1-30 sreathan |
| Bog agus toinneamh | 0.75% àbhaisteach, 0.5% adhartach | ||
| Min.meud PCB crìochnaichte | 10 x 10mm (0.4 x 0.4) | ||
| Max.meud PCB crìochnaichte | 530 x 1000mm (20.9 x 47.24 ") | ||
| Ioma-phreas airson vias dall / tiodhlacaidh | Ioma-press Cycle≤3 tursan | ||
| Tighead bòrd crìochnaichte | 0.3 ~ 7.0mm (8 ~ 276m) | ||
| Crìochnaichte fulangas tighead bòrd | +/- 10% àbhaisteach, +/- 0.1mm adhartach | ||
| Crìoch air uachdar | HASL, HASL gun luaidhe, òr flash, ENIG, Plating òir cruaidh, OSP, staoin bogaidh, airgead bogaidh, msaa | ||
| Crìochnachadh uachdar roghnach | ENIG + meur òir, òr Flash + meur òir | ||
| Seòrsa Stuth | FR4, alùmanum, CEM, Rogers, PTFE, Nelco, Polyimide / Polyester, msaa. | Faodaidh tu cuideachd na stuthan a cheannach mar iarrtas | |
| Foil copair | 1/3oz ~ 10oz | ||
| Seòrsa Prepreg | FR4 Prepreg, LD-1080(HDI) | 106, 1080, 2116, 7628, msaa. | |
| Deuchainn earbsach | Neart craiceann | 7.8N/cm | |
| Fammability | 94V-0 | ||
| Ionic truailleadh | ≤1ug/cm² | ||
| Min.dielectric tiugh | 0.075mm (3m) | ||
| Fulangas impedance | +/- 10%, faodaidh min smachd a chumail air +/- 7% | ||
| Sreath a-staigh & gluasad ìomhaigh còmhdach a-muigh | Comas inneal | Inneal sgrìobadh | Tighead stuth: 0.11 ~ 3.2mm (4.33mil ~ 126mil) |
| Meud stuth: min.228 x 228mm (9 x 9") | |||
| Laminator, taisgealaiche | Stuth tighead: 0.11 ~ 6.0mm (4.33 ~ 236mil) | ||
| Stuth meud: min 203 x 203mm (8 x 8"), max. 609.6 x 1200mm (24 x 30 ") | |||
| Loidhne-sgeadachaidh | Tighead stuth: 0.11 ~ 6.0mm (4.33mil ~ 236mil) | ||
| Meud stuth: min.177 x 177mm (7 x 7") | |||
| Comas Pròiseas còmhdach a-staigh | Min.leud / farsaingeachd loidhne a-staigh | 0.075/0.075mm (3/3m) | |
| Min.astar bho oir toll gu conductive | 0.2mm (8m) | ||
| Min.fàinne annular còmhdach a-staigh | 0.1mm (4m) | ||
| Min.cead iomallachd còmhdach a-staigh | 0.25mm (10mil) àbhaisteach, 0.2mm (8mil) adhartach | ||
| Min.astar bho oir bùird gu conductive | 0.2mm (8m) | ||
| Min.leud beàrn eadar talamh copair | 0.127mm (5m) | ||
| Neo-chothromachadh tiugh copair airson cridhe a-staigh | H/1oz, 1/2oz | ||
| Max.tiugh copair crìochnaichte | 10 unns | ||
| Ìre a-muigh Comas Pròiseas | Min.leud / farsaingeachd loidhne a-muigh | 0.075/0.075mm (3/3m) | |
| Min.meud pad toll | 0.3mm (12 mìle) | ||
| Comas Pròiseas | Max.meud tetting slot | 5 x 3mm (196.8 x 118m) | |
| Max.meud toll teanta | 4.5mm (177.2m) | ||
| Min.leud fearainn teanta | 0.2mm (8m) | ||
| Min.fàinne annular | 0.1mm (4m) | ||
| Min.raon-cluiche BGA | 0.5mm (20m) | ||
| AOI | Comas inneal | Orbotech SK-75 AOI | Stuth tighead: 0.05 ~ 6.0mm (2 ~ 236.2mil) |
| Meud stuth: max.597 ~ 597mm (23.5 x 23.5 ) | |||
| Inneal Ves Orbotech | Stuth tighead: 0.05 ~ 6.0mm (2 ~ 236.2mil) | ||
| Meud stuth: max.597 ~ 597mm (23.5 x 23.5 ) | |||
| Drileadh | Comas inneal | Inneal drile MT-CNC2600 | Stuth tighead: 0.11 ~ 6.0mm (4.33 ~ 236mil) |
| Meud stuth: max.470 ~ 660mm (18.5 x 26 ") | |||
| Min.meud drile: 0.2mm (8mil) | |||
| Comas Pròiseas | Min.meud bit drile ioma-bhuail | 0.55mm (21.6m) | |
| Max.co-mheas taobh (meud bòrd crìochnaichte VS Drill meud) | 12:01 | ||
| Fulangas suidheachadh toll (an coimeas ri CAD) | +/-3 mìle | ||
| Toll counterbore | PTH&NPTH, Ceàrn as àirde 130 °, Trast-thomhas as àirde <6.3mm | ||
| Min.astar bho oir toll gu conductive | 0.2mm (8m) | ||
| Max.meud bit drile | 6.5mm (256m) | ||
| Min.meud slot ioma-bhuail | 0.45mm (17.7m) | ||
| Fulangas meud toll airson preas iomchaidh | +/- 0.05mm (+/- 2mil) | ||
| Min.Fulangas meud slot PTH | +/- 0.15mm (+/- 6mil) | ||
| Min.Fulangas meud slot NPTH | +/- 2mm (+/- 78.7mil) | ||
| Min.eadar-dhealachadh bho oir toll gu giùlan (Blind vias) | 0.23mm (9m) | ||
| Min.meud drile laser | 0.1mm (+/- 4m) | ||
| Ceàrn toll countersink & Trast-thomhas | 82,90,120° as àirde | ||
| Pròiseas fliuch | Comas inneal | Loidhne plating pannal & pàtran | Stuth tighead: 0.2 ~ 7.0mm (8 ~ 276mil) |
| Meud stuth: max.610 x 762mm (24 x 30") | |||
| Deburring Maching | Stuth tighead: 0.2 ~ 7.0mm (8 ~ 276mil) | ||
| Meud stuth: min.203 x 203mm (8" x 8") | |||
| Loidhne Desmear | Stuth tighead: 0.2mm ~ 7.0mm (8 ~ 276mil) | ||
| Meud stuth: max.610 x 762mm (24 x 30") | |||
| Loidhne tin plating | Stuth tighead: 0.2 ~ 3.2mm (8 ~ 126mil) | ||
| Meud stuth: max.610 x 762mm (24 x 30") | |||
| Comas Pròiseas | Tighead copar balla toll | cuibheasachd 25um (1mil) àbhaisteach | |
| Crìochnaichte tiugh copair | ≥18um(0.7m) | ||
| Leud na loidhne as ìsle airson comharrachadh sgudail | 0.2mm(8m)) | ||
| Cuideam copair max.finished airson sreathan a-staigh & a-muigh | 7 oz | ||
| Tighead copair eadar-dhealaichte | H/1oz, 1/2oz | ||
| Masg solder & sgàilean sìoda | Comas inneal | Inneal sgrìobadh | Stuth tighead: 0.5 ~ 7.0mm (20 ~ 276mil) |
| Meud stuth: min.228 x 228mm (9 x 9") | |||
| Sealladair | Tighead stuth: 0.11 ~ 7.0mm (4.3 ~ 276mil) | ||
| Meud stuth: max.635 x 813mm (25 x 32") | |||
| Leasaich inneal | Tighead stuth: 0.11 ~ 7.0mm (4.3 ~ 276mil) | ||
| Meud stuth: min.101 x 127mm (4 x 5") | |||
| Dath | Dath mask solder | Uaine, matte uaine, buidhe, dubh, gorm, dearg, geal | |
| Dath sgàilean sìoda | Geal, buidhe, dubh, gorm | ||
| Comas Masg Solder | Min.fosgladh masg solder | 0.05mm (2m) | |
| Max.air a phlugadh tro mheud | 0.65mm (25.6m) | ||
| Min.leud airson còmhdach loidhne le S / M | 0.05mm (2m) | ||
| Min.solder mask uirsgeulan leud | 0.2mm (8mil) àbhaisteach, 0.17mm (7mil) adhartach | ||
| Min.tiugh mask solder | 10um (0.4m) | ||
| Tighead masg solder airson teanta | 10um (0.4m) | ||
| Min.leud / farsaingeachd loidhne ola gualain | 0.25/0.35mm (10/14m) | ||
| Min.lorgair carbon | 0.06mm (2.5m) | ||
| Min.lorg loidhne ola carbon | 0.3mm(12m)) | ||
| Min.eadar-dhealachadh bho phàtran gualain gu padaichean | 0.25mm (10m) | ||
| Min.leud airson loidhne / ceap còmhdach masg peelable | 0.15mm (6m) | ||
| Min.leud drochaid masg solder | 0.1mm(4m)) | ||
| Solder mask cruas | 6H | ||
| Comas Masg Peelable | Min.eadar-dhealachadh bho phàtran masg peelable gu pad | 0.3mm(12m)) | |
| Max.meud airson toll teanta masg peelable (Le clò-bhualadh sgrion) | 2mm (7.8m) | ||
| Max.meud airson toll teanta masg peelable (Le clò-bhualadh alùmanum) | 4.5mm | ||
| Tighead masg peelable | 0.2 ~ 0.5mm (8 ~ 20m) | ||
| Comas sgrion sìoda | Min.leud loidhne sgàilean sìoda | 0.11mm (4.5m) | |
| Min.àirde loidhne sgàilean sìoda | 0.58mm (23m) | ||
| Min.eadar-dhealachadh bho uirsgeul gu pad | 0.17mm (7m) | ||
| Crìoch air uachdar | Comas Crìochnachaidh Surface | Max.fad meòir òir | 50mm(2") |
| EIG | 3 ~ 5um (0.11 ~ 197mil) nicil, 0.025 ~ 0.1um (0.001 ~ 0.004mil) òr | ||
| meur òir | 3 ~ 5um (0.11 ~ 197mil) nicil, 0.25 ~ 1.5um (0.01 ~ 0.059mil) òr | ||
| HASL | 0.4um (0.016m) Sn/Pb | ||
| Inneal HASL | Stuth tighead: 0.6 ~ 4.0mm (23.6 ~ 157mil) | ||
| Meud stuth: 127 x 127mm ~ 508 x 635mm (5 x 5 "~ 20 x 25") | |||
| Plating òir cruaidh | 1-5u" | ||
| Tin bogaidh | 0.8 ~ 1.5um (0.03 ~ 0.059mil) Tin | ||
| Airgid bogaidh | 0.1 ~ 0.3um (0.004 ~ 0.012m) Ag | ||
| OSP | 0.2 ~ 0.5um (0.008 ~ 0.02m) | ||
| E-Deuchainn | Comas inneal | Neach-deuchainn probe itealaich | Stuth tighead: 0.4 ~ 6.0mm (15.7 ~ 236mil) |
| Meud stuth: max.498 x 597mm (19.6 ~ 23.5 ") | |||
| Min.astar eadar ceap deuchainn gu oir bùird | 0.5mm (20m) | ||
| Min.strì an aghaidh giùlain | 5 tha | ||
| Max.an aghaidh insulation | 250m | ||
| Max.bholtaids deuchainn | 500V | ||
| Min.meud pad deuchainn | 0.15mm (6m)) | ||
| Min.pad deuchainn gu farsaingeachd pad | 0.25mm (10m) | ||
| Max.sruth deuchainn | 200mA | ||
| Pròifil | Comas inneal | Seòrsa pròifil | Slighe NC, gearradh V, tabaichean slot, toll stampa |
| Inneal slighe NC | Stuth tighead: 0.05 ~ 7.0mm (2 ~ 276mil) | ||
| Meud stuth: max.546 x 648mm (21.5 x 25.5 ") | |||
| Inneal gearraidh V | Tighead stuth: 0.6 ~ 3.0mm (23.6 ~ 118mil) | ||
| Leud stuth as àirde airson gearradh-V: 457mm (18 ") | |||
| Comas Pròiseas | Min.meud bit routing | 0.6mm (23.6m) | |
| Min.toirt a-mach fulangas | +/- 0.1mm (+/- 4mil) | ||
| Seòrsa ceàrn air a ghearradh le V | 20°, 30°, 45°, 60° | ||
| Fulangas ceàrn air a ghearradh le V | +/- 5° | ||
| Fulangas clàraidh V-gearradh | +/- 0.1mm (+/- 4mil ) | ||
| Min.beàrn meòir òir | +/- 0.15mm (+/- 6mil) | ||
| Fulangas ceàrn bevelling | +/- 5° | ||
| Tha bevelling fhathast fo fhulangas tighead | +/- 0.127mm (+/- 5mil) | ||
| Min.radius a-staigh | 0.4mm (15.7m) | ||
| Min.astar bho conductive gu dealbh-iomaill | 0.2mm (8m) | ||
| Fulangas doimhneachd countersink / counterbore | +/- 0.1mm (+/- 4mil) | ||